Medical elbow joint CPM rehabilitation machine

Medical elbow joint CPM rehabilitation machine

Medical elbow joint CPM rehabilitation equipment is widely used in rehabilitation center, home and hospital, it helps patients doing elbow joint rehabilitation exercise.

  • Description
  • Inquiry

Description

 Rehabilitation center elbow joint CPM rehabilitation machine

 Rehabilitation center elbow joint CPM rehabilitation machine

Rehabilitation center elbow joint CPM rehabilitation machine

Type: rehabilitation equipment

Specification:

1.LCD color display                   

2.Motion angle,speed and time can be controlled by digital equipment

3.The length of stand can be adjusted not more than 50mm

4.Angle motion range of joint:0°—150°

5. Speed:9 level(0.5°/s-3.5°)

TypeRehabilitation equipment
Product nameMedical elbow joint CPM machine
FunctionUsed for elbow joint rehabilitation training
ApplicationRehabilitation center, hospital, clinic
MaterialSteel frame, steel
MOQ1 pcs
Technique feature of product:
The Elbow joint CPM is the newly-designed medical equipment product, the main
technique feature of product are as follows:
1. Special designed motor drive, run steadily, low noise, and long span life.
2. Microcomputer digital control design and it also adopt imported integrated parts,
high volume imported CPU and intelligent program design, the machine also has the
function of over-load protection.
3. Big screen liquid display, all the parameters can be read clearly.
4. Considering the need of medical curing, the motion range is wide.
5. Optimized structure design.
Main structure
This machine is made up of host computer, supporting pole, leather cushion, hand
controller, and so on.
The main capability parameters are as follows:
Angle motion range of joint:0°—125°;
Angle motion speed range:0.5°—3.5°/s;
Adjusting range of movable pole: ≥50mm
Maximum load: ≥50N
Power supply: 220Vac,50Hz
Power: ≤70W
The adaptively of unit
This unit is used for the convalescence of Elbow joint fracture.
This unit can adjust the motion angle of joint, it can promote the convalescence of
Elbow joint.
Operation method of kneel joint motion
1. Input the power, open the power switch ,the display will shows the last setting
data .User can change the data according your condition.
2.Set Extension angle 、 Flex angle、Speed、 Time according to the state of patient.
press the correspond key, it shows the parameter on the machine(the character shows as
“EXT”、“FLEX”、“S”、“T”)the label“.”is blinking. And you can press or to
adjust the parameter.
3. Confirm the parameter on the display is correct. you can press start/pause to
start the machine, it displays“RUN” and immediate motion angle, watching the machine
running for more than two times, if it runs in normal state, press the start/pause to pause
it, then fix the patient’s arm and palm.4. Run two times in low speed, confirm all parameter be fit for the requirements of
user again, then begin to cure. If all parameter need to adjust, press start/pause to pause,
and reset all parameter.
5. after the above operation, the machine can be started,it is suggested that run in
low speed and range is good to patient, then increase the speed and motion range if the
patient can hold.
6. There are three control modes: normal, angle and speed mode; normal mode means that
the machine is running under setting data; angle mode means that the machine runs every 15mins ,
running angle will automatically increase to 3 °; speed mode means that setting Data run
approximately every 15min, run speed will automatic increase of 1 file.
7, this machine has the function of moment, the moment “big” means the machine control
works by 100% of motor output power, moment “in” said the machine control works by about 65%
of the motor output power, moment “small”said the machine control works by about 35% of motor
output power control. Exceeding the set of torque control (output power), then the machine will
automatically reverse operation, to protect the limb.
8.The main function of hand controller is for safe protection. One key can stop
machine, and the other key is extension key, press any of them can protect the patient from
machine malfunction.
Operation attentions:
a. Tell the user about machine’s stopping using and control methods. In case to bring the occurrence of
hazards in abnormal operation and malfunction.
b. Fixed location bandage can change are available, using it, pay attention to fix locking bolts.
Simple failure elimination and maintenance
If the machine can’t run, first check the power supply, check the power switch light
is normal or not, then check the screen display. If you are sure the power supply is off,
then check inner fuse of power outlet. If it’s fine, but there is no power supply, please
contact with us.
If the machine has power, but it has no display, maybe the inner connection has some
problem. This is small failure, but it is suggested that you contact with us.
If the screen can display, but the key on the screen can’t work, it should be the
problem of printing line of control panel. If you can’t eliminate the problem, please
contact with us.
The shell of the unit should be cleaned using dry detergent and soft cloth.
Commitment for after serviceIf the product has any quality problem in one year, we provide the service of change
and repair, and we also provide long-term repairing service. And only charge the material
expenses in guarantee period.

 

 

 

 

 

 

Physiotherapy equipment
Walking Rehabilitation
Upper limb rehabilitation
Lower limb rehabilitation
Whole body rehabilitation
Children rehabilitation
Finger rehabilitation
CPM series
Treatment table series
Lumbar and neck traction bed
Medical mask

 

 

 

 

 

Ultra Low Temperature Freezer
Fiber Optical Multiplexer
Telecom Equipment

Online Service
Live Chat