Medical ankle joint CPM rehabilitation equipment

Medical ankle joint CPM rehabilitation equipment is widely used in rehabilitation center, home and hospital, it helps patients doing ankle joint rehabilitation exercise.

Category: CPM series Tag: ankle joint CPM

Description
Inquiry

Description

Rehabilitation center ankle joint CPM rehabilitation equipment

Type: rehabilitation equipment

Technique feature of product：

The Ankle joint CPM is the newly-designed medical equipment product, the main

technique feature of product are as follows:

1. Special designed motor drive, run steadily, low noise, and long span life.

2. Microcomputer digital control design and it also adopt imported integrated parts,

high volume imported CPU and intelligent program design, the machine also has the

function of over-load protection.

3. Big screen liquid display, all the parameters can be read clearly.

4. Considering the need of medical curing, the motion range is wide.

5. Optimized structure design.

Main structure

Technique feature of product：

The Ankle joint CPM is the newly-designed medical equipment product, the main

technique feature of product are as follows:

1. Special designed motor drive, run steadily, low noise, and long span life.

2. Microcomputer digital control design and it also adopt imported integrated parts,

high volume imported CPU and intelligent program design, the machine also has the

function of over-load protection.

3. Big screen liquid display, all the parameters can be read clearly.

4. Considering the need of medical curing, the motion range is wide.

5. Optimized structure design.

Main structure

This machine is made up of host computer, supporting pole, leather cushion, hand

controller, and so on.

The main capability parameters are as follows:

Angle motion range of joint：0°—90°；

Angle motion speed range：0.5°—3.5°/s；

Power supply： 220Vac，50Hz

Power：〈60W

The adaptively of unit

This unit is used for the convalescence of Ankle joint fracture.

This unit can adjust the motion angle of joint, it can promote the convalescence of

Ankle joint.

Operation method of kneel joint motion

1. Input the power, open the power switch, then the machine run to the initial

position. The display shows “YATAI”, and it stays in setting state, the right-hand corner

shows“SETUP”。

2. According to the sketch map, pull the supporting pole to make it fit for the

patient’s arm, and make the pole’s middle joint stay in the position of 0°—10°, tighten

up the bolt.

3.Set Extension angle 、 Flex angle、 Speed、Time according to the state of patient.

press the correspond key, it shows the parameter on the machine（the character shows as

“EXT”、“FLEX”、“S”、“T”）the label“.”is blinking. And you can press or to

adjust the parameter.

4. Confirm the parameter on the display is correct. you can press start/pause tostart the machine, it displays“RUN” and immediate motion angle, watching the machine

running for more than two times, if it runs in normal state, press the start/pause to pause

it, then fix the patient’s arm and palm.

After the above operation，the machine can be started，it is suggested that run in

low speed and range is good to patient, then increase the speed and motion range if the

patient can hold.

5. The main function of hand controller is for safe protection. One key can stop

machine, and the other key is extension key, press any of them can protect the patient

from machine malfunction.

Simple failure elimination and maintenance

If the machine can’t run, first check the power supply, check the power switch light

is normal or not, then check the screen display. If you are sure the power supply is off,

then check inner fuse of power outlet. If it’s fine, but there is no power supply, please

contact with us.

If the machine has power, but it has no display, maybe the inner connection has some

problem. This is small failure, but it is suggested that you contact with us.

If the screen can display, but the key on the screen can’t work, it should be the

problem of printing line of control panel. If you can’t eliminate the problem, please

contact with us.

The shell of the unit should be cleaned using dry detergent and soft cloth.

Commitment for after service

If the product has any quality problem in one year, we provide the service of change

and repair, and we also provide long-term repairing service. And only charge the material

expenses in guarantee period.

Type	Rehabilitation equipment
Product name	Medical elbow joint CPM machine
Function	Used for elbow joint rehabilitation training
Application	Rehabilitation center, hospital, clinic
Material	Steel frame, steel
MOQ	1 pcs

ankle joint CPM

1.How to deliver products to you?

If order large amount products, by sea is the best way, tell us the seaport name, then we will tell you sea freight.

If order several products, by air is the best way, tell us the airport name, then we will tell you air freight.

If order one small product, by express is the best way, tell us your door address, then we will tell you freight.

2.How to install our products?

If meeting problems during installation, we will take install video to help you, so please do not worry about it.

3.Delivery time

3-15 days, it based on the purchasing amount.

3.How to visit our factory?

Our factory is located in Changzhou city, jiangsu province, you can fly to Shanghai HongQiao airport, then take train to Changzhou city, or you can fly to Changzhou Benniu International Airport, then we will pick up you.

4.What’s the warranty of our products?

All of our products have 1 year warranty, during 1 year we will deliver replaced parts to you freely, out of 1 year, we will still supply replaced parts to you.

5.Payment terms and ways

We accept bank transfer, Western Union for payment

Small order: 100% payment before production

Large order: 50% advance payment before production, 50% balance payment before delivery.

TOPMED Physio Rehab Co.,Ltd is the leader for rehabilitation equipment and physical therapy products in China market. Quality is our principle, good quality, good service to our customers.

TOPMED specializes in the production of walking rehabilitation equipment, upper limb rehabilitation equipment, lower limb rehabilitation equipment, occupational therapy rehabilitation equipment, children rehabilitation equipment and physical therapy products. Products are widely used in rehabilitation center, hospital and clinic.

Warmly welcome you and opening up the boundaries of communication. We synchronize with your ideal partner!

Physiotherapy equipment
Walking Rehabilitation
Upper limb rehabilitation
Lower limb rehabilitation
Whole body rehabilitation
Children rehabilitation
Finger rehabilitation
CPM series
Treatment table series
Lumbar and neck traction bed
Medical mask